Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Corona, CA
We’re Gate Repair Eastvale, a gate-only specialist serving Corona and the surrounding Temescal Valley. Gate Installation is what we lead with here because Corona’s mix of older tract homes and newer hillside properties demands very different setups: a manual swing gate on a flat 1970s lot near downtown needs different hardware than an automated slide gate on a sloped driveway up toward Eagle Glen. The wind that funnels through this corridor and the clay soil that shifts post footings mean a gate that isn’t anchored right will sag, bind, or jam within a season or two. Call (855) 601-8166 for a free estimate.
Why Corona Homes Are Different
Corona sits in the wind-funneled Temescal Valley corridor between the Santa Ana Mountains and the Chino Hills. When the Santa Ana winds kick up in the fall, they gust hard enough to rack and twist gates that weren’t braced for lateral load. We see swing gates that no longer meet the latch, slide gates that bind on their track, and openers that burn out fighting the extra drag. Gate repair in Corona is as much about wind-load stabilization and hinge anchoring as it is about replacing worn parts.
The housing stock splits two ways. Older core neighborhoods, roughly the 92879 through 92882 ZIPs, hold mid-century and 1970s-80s tract homes on flat lots. Those gates often ride on posts set in clay-heavy soil that shrinks in the dry summer heat and swells with winter rain. The seasonal movement throws gates out of plumb, a problem that starts as a slight drag and ends with a gate that won’t latch at all. The fix is usually re-setting the post footer, not just adjusting the hinges.
Farther out toward the newer master-planned communities in 92880, 92881, and 92883, we work on long, sloped driveways with wider gates, often slide gates with automated openers. These homes tend to be newer, but the grade changes and wind exposure create their own set of alignment and operator issues. Within a few miles, a job can swing from realigning a manual ornamental gate to diagnosing a commercial-grade slide gate operator.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Corona Services
Corona homeowners and property managers call us most often for two things: a gate that stopped working and a gate that never worked quite right because the opener or wiring is failing. Here’s what each involves.
Gate Repair in Corona
A gate that drags, sags, or won’t close is usually a mechanical problem: hinges that have worn, posts that have heaved out of the clay, or a track that’s drifted out of alignment. We start by looking at the whole gate, not just the obvious symptom, because a binding hinge can take out an opener motor in a week if it isn’t corrected. On Corona’s older flat lots, we check post plumb first, since soil movement is the most common root cause. On hillside properties, wind load is usually the bigger factor. We quote the fix before we start, and we carry the common hardware for Gate Repair in Corona on the truck.
Electric Gate Repair in Corona
When the gate won’t open, opens halfway, or only responds to the remote from a few feet away, the issue lives in the system: the motor, control board, sensors, wiring, or access hardware. Electric gate repair is core to what we do, not an add-on. We diagnose from the system in front of us, not a preferred parts list, so we don’t recommend replacing a board when a relay is the actual failure. Electric Gate Repair in Corona includes everything from a Ghost Controls arm that stopped mid-travel to a Viking loop detector that stopped sensing cars.
Gate Installation in Corona
Most Gate Installation projects in Corona come down to one question: is this gate built for the wind and soil it’s about to live with? A gate spec’d for a flat, sheltered lot will fail early on a hillside driveway that catches the full force of a Santa Ana. We measure, check slope and setbacks, confirm post footing depth for the soil type, then build a gate that stays square and cycles reliably through Corona’s hot, dry summers and gusty fall winds. The written estimate sets the final price, agreed before any work starts.
Automatic Gate Installation
Signs you need it
You’re opening and closing the gate by hand because adding automation later keeps getting pushed off, or the existing opener is too weak for the gate’s weight and wind load in Corona.
What it costs in Corona
Automatic gate installation in Corona typically runs $1,800 to $3,400 for the operator, brackets, sensors, and wiring on a properly hung gate, depending on gate size and access hardware.
How we do it
We mount the operator, run low-voltage wiring in conduit, set photo-eye sensors and safety edges, and program remotes and the keypad, then cycle the gate through at least twenty full operations to confirm it runs without strain.
Driveway Gate Installation
Signs you need it
Your driveway gate posts are heaving in the clay and the gate no longer hangs square, or you’re adding a gate where none exists on a sloped Corona hillside lot.
What it costs in Corona
A new single swing gate with steel posts and hardware in Corona typically runs $2,600 to $5,900 installed, with wider or automated slide gates running toward the upper end.
How we do it
We set steel posts in concrete at the proper depth for the soil, hang the gate with adjustable hinges, and align the latch so the gate closes cleanly without fighting the grade or prevailing wind.
Sliding Gate Installation
Signs you need it
Your driveway slopes down toward the street or your gate opening is wide enough that a swing gate would eat too much apron space and catch too much Santa Ana wind.
What it costs in Corona
Sliding gate installation in Corona typically runs $3,800 to $8,100 for the gate, track, posts, and hardware, excluding the operator, depending on width and steel gauge.
How we do it
We pour a level track pad, set the track and guide posts, hang the gate with adjustable trucks, and align the track so the gate rolls without binding through the full travel.
What Gate Installation Costs in Corona
| Item | Typical range in Corona |
|---|---|
| Automatic gate operator installed | $1,800 – $3,400 |
| Single swing gate with posts and hardware | $2,600 – $5,900 |
| Sliding gate with track, posts, and hardware | $3,800 – $8,100 |
How long does a gate installation take in Corona?
Most single driveway gates go in over two days: day one for post holes and concrete, day two for hanging, automation, and testing. Wider custom gates or slide tracks can run three to four days, depending on the excavation and grade work needed on hillside lots.
Does Corona require a permit for a new gate?
Most cities require a permit for a new gate, especially an automated one, and HOA-governed communities in Corona often have their own appearance rules before you build. Check with Corona’s building department and your HOA, and we’ll install to the approved spec from your written estimate.
Brands We Service in Corona
We work on your brand. Our technicians know Ghost Controls and Mighty Mule residential openers as well as they know DoorKing and Elite commercial systems. We stock common control boards, remotes, and edge sensors for these locally, so many Corona repairs finish in one visit. See our brands.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Corona, CA
| Service | Typical range in Corona |
|---|---|
| Hinge and post alignment on a sagging gate | $140 – $310 |
| Hinge replacement, welded steel | $190 – $390 |
| Gate operator arm replacement | $290 – $510 |
| Control board replacement | $290 – $480 |
| Keypad, receiver, or edge sensor replacement | $190 – $340 |
| New operator installation | $690 – $1,150 |
| Gate repair labor, full rebuild | $360 – $1,250 |
| Full automatic gate install | $1,800 – $3,400 |
| Driveway gate install | $2,600 – $5,900 |
| Sliding gate install | $3,800 – $8,100 |
Two things push a Corona quote toward the upper end: soil movement on older flat lots that requires re-setting posts, and wind exposure on hillside properties that demands heavier steel and stronger operators. You get a written estimate before work starts, and that price doesn’t change unless we find something structural that we show you and you approve first.
Neighborhoods We Serve in Corona
We cover the flat tract streets near downtown, the hillside communities along the 15, and everything between. Response time across Corona typically runs one to two hours from dispatch. We serve:
- Downtown Corona and the older tract streets around 92879
- Eagle Glen and the hillside developments in 92883
- The master-planned communities off Ontario and Foothill
- Sycamore Creek and the new builds in 92877
- Corona Hills and the neighborhoods along Lincoln
Service Area – Cities Near Corona
Gate Repair Eastvale runs one service area across the western Inland Empire. We see the same clay soil and Santa Ana wind patterns in Home Gardens, CA and Norco, CA, and the same newer hillside lots in Glen Avon, CA. Our home base in Eastvale, CA keeps response times short into Corona. Call (855) 601-8166. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Serving Corona, CA – Our Local Coverage Area
We serve Corona and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Corona
Fast dispatch from 7am to 7pm, Sunday through Friday. Most Corona neighborhoods are within one to two hours of our truck depots. We answer 24/7, and a call outside dispatch hours is booked into the next opening.
Many master-planned communities in Corona have design review rules for fences and gates, and the city may require a permit for automated systems. Check with both before the work, and we’ll install to the approved spec. Call (855) 601-8166 for a free estimate.
Both. A big share of our Corona work is realigning and rebuilding manual swing gates on older tract homes where the posts have heaved out of the clay. From the motor to the hinge, we handle the whole gate. Call (855) 601-8166 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within the hour.
- 4You approve before work beginsNothing starts until you say go.
What Corona Customers Say
"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
- Adel Mansour"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
- Arjun Patel"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
- Sarah Rhodes