Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Pedley, CA
Gate installation in Pedley is different from almost anywhere else in Riverside County. Most properties here are half-acre-plus equestrian lots with horses, RVs, and stock trailers, so the gates we build and repair are heavy pipe-frame and tube-steel ranch gates, not the decorative walk gates you see in newer subdivisions. The hard Inland Empire heat, Santa Ana dust, and shifting alluvial soil all work against gate hardware, which means posts need deeper footings, hinges need reinforcement, and operators need better protection than a standard builder-grade install. If your Pedley gate is sagging, sticking, or refusing to open, call (855) 601-8166. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Pedley Homes Are Different
Pedley sits in the Jurupa Valley, where residential streets give way to dirt driveways, corrals, and open ground. The housing stock in 92509 is mostly older ranch-style and custom homes on large rural lots, plus a fair number of manufactured homes. Many of these properties have self-built or welded pipe gates rather than builder-installed ones, and the gateposts are often set in the area’s sandy, rocky alluvial soil that shifts with irrigation and settling. That matters because a gate that was straight five years ago may now lean just enough to bind against the latch post or throw the operator out of alignment.
The climate compounds the problem. Summers here routinely push well over 100°F, and that heat dries out wood gates, warps metal frames, and bakes lubricant out of hinges and rollers. During Santa Ana season, wind-blown grit from the adjacent open ground gets into tracks, hinge barrels, and operator internals. On the larger Pedley lots, gates double as livestock containment, which means a sagging or self-closing gate isn’t just an inconvenience. It’s a horse getting loose onto a road near the Santa Ana River bottom. That’s why we routinely reinforce hinges and latches on heavy pipe gates that run several times a day.
Permitting here can vary by specific location and gate type. An automatic gate with a vehicle sensor or entry keypad may trigger a review from the city or county, especially when the gate sits close to the road right-of-way. We recommend asking your city’s building department about permit requirements before any new gate installation or major operator upgrade. We can also help you understand what’s typically required and work with your timeline once you have an answer.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Pedley Services
Most Pedley property owners call us for two things: getting an existing gate working again and getting an automatic opener back online. Here’s what each involves in this area.
Gate Repair in Pedley
Pedley gate repair usually means a heavy pipe-frame driveway gate that has sagged off its hinges, a latch that no longer catches, or a sliding gate that has jumped its track. The dry heat and blowing dust here accelerate every common failure mode. We inspect the full system from the post footings to the latch hardware, then give you a written estimate before any work starts. For the full picture on what we fix and how quickly we can get to you in Pedley, see Gate Repair in Pedley. Call (855) 601-8166 and we’ll walk you through it.
Electric Gate Repair in Pedley
Automatic openers on Pedley ranch gates work hard. They cycle several times a day for horse trailers, feed deliveries, and family vehicles, and they do it in dust and triple-digit heat. When an opener stops responding, the problem is usually the control board, a sensor knocked out of alignment, a wiring fault, or a motor that has finally given out. Electric gate diagnostics are core to what we do, not an add-on. We work on your brand. Learn more at Electric Gate Repair in Pedley. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Gate Installation in Pedley
New gate installation in Pedley starts with a simple question: what is this gate actually for? On most properties here, the answer is livestock containment, vehicle security for RVs and trailers, or both. That changes everything about the design, from the post depth and diameter to the hinge type and the operator you choose. A gate that has to hold a 1,200-pound horse behind it is a different project than a gate that just marks a driveway entrance. We’re a gate-only specialist based in the Inland Empire, and Gate Installation is what we do every day.
Automatic Gate Installation
Signs you need it
You’re opening and closing a heavy gate by hand several times a day, or you want controlled access to a property with horses, RVs, or equipment that shouldn’t be left unsecured.
What it costs in Pedley
Automatic gate installation in Pedley typically runs $4,800 to $11,500, depending on the operator, gate size, and power run length from the house or panel.
How we do it
We set the posts to proper footing depth for Pedley’s sandy, rocky soil, hang the gate, mount the operator, and run the power and sensor wiring, then test full open and close cycles before we leave.
Driveway Gate Installation
Signs you need it
Your long driveway opens onto a road with regular traffic, or you’re tired of uninvited vehicles turning around in your yard and kicking up dust.
What it costs in Pedley
Driveway gate installation in Pedley typically runs $3,500 to $8,500 for a single swing gate, while a double swing or slide gate can push the range to $6,000 to $11,000 depending on width and materials.
How we do it
We measure the opening, check the soil and grade, and recommend a swing or slide configuration that won’t bind when Pedley’s dry-season dust and heat put stress on the hardware.
Sliding Gate Installation
Signs you need it
Your driveway slopes or your gate opening is wide enough that a swing gate would need too much clearance, and you want a gate that won’t sag into the track over time.
What it costs in Pedley
Sliding gate installation in Pedley typically runs $6,500 to $11,500, including the track, rollers, motor, and the reinforced steel frame that keeps the gate true.
How we do it
We lay the track on a compacted base that won’t shift with irrigation settling, mount the roller carriage, hang the gate, and set the motor with its limit switches and safety edges tested.
What Gate Installation Costs in Pedley
| Item | Typical range in Pedley |
|---|---|
| Manual driveway gate (single swing) | $3,500 – $8,500 |
| Automatic gate with operator | $4,800 – $11,500 |
| Sliding gate with motor | $6,500 – $11,500 |
These are typical ranges, not quotes. The written estimate sets the final price, and you’ll see that number before any work begins.
How long does gate installation take in Pedley?
Most single gate installations in Pedley take one to three days on site, depending on the footing work, power run, and whether we’re removing an old gate first. A slide gate with a long track can add a day. We’ll give you a schedule in the written estimate. Call (855) 601-8166 for a free estimate.
Do you handle the power run and safety edges on an automatic gate?
Yes. The power run from your panel to the operator, the sensor wiring, the safety edges, and the access keypad are all part of a standard automatic gate installation with us. We don’t hand the electrical work off to another contractor. Call (855) 601-8166 to talk through your Pedley gate project.
Brands We Service in Pedley
We work on your brand. In Pedley we service and install LiftMaster, FAAC, BFT, and Linear systems, along with the full range of residential and commercial gate operators. Our techs keep common control boards, sensors, and operator parts stocked in the truck, which keeps most repairs to a single visit. From the motor to the hinge, we diagnose what you have, not what’s easiest for us to sell you. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Pedley, CA
| Service | Typical range in Pedley |
|---|---|
| Manual driveway gate (single swing) | $3,500 – $8,500 |
| Automatic gate with operator | $4,800 – $11,500 |
| Sliding gate with motor | $6,500 – $11,500 |
| Gate hinge replacement or reinforcement | $250 – $800 |
| Latch and lock replacement | $150 – $500 |
| Gate wheel or roller replacement | $180 – $550 |
| Track repair or realignment | $350 – $1,500 |
| Electric gate control board replacement | $500 – $1,900 |
| Electric gate motor replacement | $700 – $2,800 |
| Sensor or safety edge alignment | $180 – $480 |
| Full electric gate diagnostic | $150 – $450 |
What pushes a Pedley gate job higher is usually the same thing that makes the original install harder here: long power runs from the house to a gate at the far end of a big lot, posts that need to go deep through rocky alluvial soil, and heavy pipe gates that require reinforcement rather than simple hinge swaps. We quote the job in writing before any work starts, so the number you approve is the number you pay. Estimates are free.
Neighborhoods We Serve in Pedley
Pedley is a spread-out community, and we cover all of it. From the larger equestrian properties along the Santa Ana River bottom to the residential streets closer to Jurupa Valley’s commercial corridor, we’re already working on gates like yours in this area.
- Bellgrave area
- Indian Hills
- Jurupa Hills
- Pedley proper
- Riverside bottom ranches
Response time for most Pedley gate calls is same-day when we’re already working in the Jurupa Valley area, and we can usually have a technician to you within a day for non-emergency work. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Service Area – Cities Near Pedley
We work across the Jurupa Valley and the wider Inland Empire, so if you’re just outside Pedley, chances are we’re already in your area. We regularly serve Glen Avon, CA, Rubidoux, CA, Bloomington, CA, and Eastvale, CA. Residential or commercial, we’ve seen that system before.
Serving Pedley, CA – Our Local Coverage Area
We serve Pedley and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Pedley
We answer 24/7, and for most Pedley calls we can have a technician on site the same day. Fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. Call (855) 601-8166 and we’ll tell you exactly when we can be there.
It depends on the gate type, location, and whether it has an automatic opener. Some Pedley properties fall under county jurisdiction, others under the city of Jurupa Valley. We recommend calling your city or county building department to confirm before any new installation. We can help you understand what’s typically required once you know your jurisdiction.
Yes. We handle commercial-grade automation systems from FAAC, BFT, DoorKing, Viking, and LiftMaster, and we work with HOA managers and commercial property owners throughout Pedley and the Jurupa Valley. Electric gate diagnostics are core to what we do, not an add-on. Call (855) 601-8166 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within the hour.
- 4You approve before work beginsNothing starts until you say go.
What Pedley Customers Say
"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
- Arjun Patel"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
- Sarah Rhodes"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
- Eduardo Rodriguez